F1-5
Bookshelf monitor from the F1 series, the pinnacle of contemporary engineering by Fyne Audio: 125 mm IsoFlare with FyneFlute and aluminium plinth with BassTrax diffuser, handcrafted in the UK.
F1-8
F1 series standmount monitor with 200mm IsoFlare and BassTrax diffuser, designed for the dedicated FS8 stand: the pinnacle of contemporary Fyne Audio engineering in bookshelf format.
Official finishes High-gloss piano walnut
Availability, lead time and price: confirmed in your quotation.
Description
The F1-8 brings the technology and expertise of the F1 series floorstanders to a stand-mount monitor format. It features a 200 mm IsoFlare point source driver, with a multi-fibre bass/mid cone, FyneFlute surround, and a 25 mm magnesium dome compression tweeter on a ferrite magnet system, ensuring stable imaging with time alignment. The enclosure combines a downward-firing port with the Tractrix BassTrax diffuser housed in a machined aluminium plinth. The cabinet, crafted from high-density birch plywood with extensive internal bracing, is hand-finished. Designed as a stand-mount monitor, it is complemented by the dedicated FS8 stand. It includes a presence control to adjust mid-band balance. This represents the pinnacle of Fyne Audio's contemporary engineering in a bookshelf format.
- 200 mm IsoFlare point source driver with FyneFlute surround and 25 mm magnesium tweeter (ferrite magnet)
- BassTrax Tractrix diffuser on an aluminium plinth with downward-firing port
- High-density birch plywood enclosure, hand-finished
- Bi-wired low-loss filter with deep cryogenic treatment
- Support monitor designed for the dedicated FS8 stand
Placement
Designed as a stand-mounted monitor, it is complemented by the dedicated FS8 stand, which positions the IsoFlare driver at the optimal listening height.
Official Finishes
- High-gloss piano walnut
Before choosing this model
The F1-8 is a standmount with a 200 mm IsoFlare driver and a 25 mm magnesium tweeter. It measures 470 × 280 × 441 mm and weighs 15.2 kg per speaker. Check stand stability, support area and load capacity before choosing one. Allow for the depth of the complete assembly, particularly if your initial space estimate was based on cabinet width alone.
Fyne recommends an amplifier rated at 30–180 W RMS. This range is a starting point: tell us your amplifier model, listening distance and usual volume so we can discuss the pairing.
Explore the series · Loudspeaker selection guide · Manufacturer specifications
Recommended retail price in Spain€8,999.99per pair · VAT includedSource: MGY distributor price list (10 Jul 2026). The price that applies to you is confirmed in a written quotation.
Price, selected version, availability and estimated lead time are confirmed individually before any order.
Purchasing, listening and delivery
Ordering and system matching
Ask about the selected version and matching with your amplifier, sources and room. Supply arrangements will be confirmed in the quotation. An enquiry does not confirm a sale.
Listening sessions and demonstrations
You can request a listening session by appointment at our Barcelona office (Carrer de Modolell, 57). When we arrange the appointment we confirm which equipment is available to hear, along with the date and time.
Home demonstrations are not offered for this product.
Delivery and setup
Delivery, its cost and the estimated timing are confirmed in writing in your quotation, for your delivery address and before you accept it.
Installation and setup can be requested as an additional service. We assess feasibility and quote it separately.
Technologies
Three Fyne Audio solutions work together to focus the image, control the bass, and reduce resonances.
- IsoFlare
IsoFlare is Fyne Audio's point source principle: the bass/midrange and treble share a common central point, ensuring the sound emanates from a single location. The aim is to achieve a coherent and stable image across a wide listening area.
- BassTrax
BassTrax is Fyne Audio's bass diffusion system based on a tractrix profile. It manages the low-frequency output of the loudspeaker to distribute bass energy more evenly throughout the room.
- FyneFlute
FyneFlute is Fyne Audio's cone suspension/termination technology. It addresses the behaviour of the cone edge to manage unwanted resonances within the speaker's operating range.
Specifications
Acoustics
- System type
- 2-way, downward-firing port, with Tractrix BassTrax diffuser
- Sensitivity (2.83 V @ 1 m)
- 91 dB
- Nominal Impedance
- 8 Ω
- Frequency response (−6 dB typical in room)
- 33 Hz – 34 kHz
Amplification
- Recommended amplifier power
- 30 – 180 W RMS
- Maximum Power
- 360 W
- Continuous Power Handling
- 90 W RMS
Transducers
- Driver configuration
- 1 × 200 mm IsoFlare (point source) with multifibre bass/midrange cone, FyneFlute surround, and 25 mm magnesium dome compression tweeter, ferrite magnet system
Frequencies and filters
- Crossover frequency
- 1.8 kHz
- Filter type
- Low-loss passive bi-wiring, 2nd order low-pass, 1st order high-pass, with deep cryogenic treatment
Construction
- Enclosure type
- High-density birch plywood with extensive internal bracing
Dimensions and Weight
- Dimensions
- 470 × 280 × 441 mm
- Net weight
- 15.2 kg
Compatibility
- Compatible stand
- FS8 stand
Frequently asked questions
- How much power does the F1-8 need?
- Fyne recommends an amplifier power of 30–180 W. The F1-8 has a sensitivity of 91 dB (2.83 V/1 m) and a nominal impedance of 8 Ω.
- Is the F1-8 a floorstander or a bookshelf?
- It is a stand monitor (standmount), designed for Fyne Audio's dedicated FS8 stand, which places it at the correct listening height.
- What technology does it use?
- A 200 mm IsoFlare point-source driver with a multi-fibre cone and FyneFlute suspension, a 25 mm magnesium-dome compression tweeter, and downward-firing BassTrax loading with a Tractrix diffuser on an aluminium plinth.
- What does the presence control adjust?
- The balance of the midrange, within a range of ±3 dB between 2.5 and 5 kHz, to fine-tune the speaker to the room and the listener's taste.
Fyne Audio distribution by LineaSonora
Request a listening session for the F1-8
Ask about amplifier matching, placement and the feasibility of a listening session by appointment. The demonstration model, venue and date must be confirmed.
More from the series F1
F1-8S
F1 series floorstanding speaker featuring a 200 mm IsoFlare driver with a neodymium magnet, enhancing the performance of the F1-8 monitor with greater bass extension and dynamics.
F1-10S
F1 series floorstanding speaker with 250 mm IsoFlare and 75 mm titanium tweeter, high sensitivity (94 dB) and response down to 26 Hz: large-format point source engineering crafted in the UK.
F1-12S
Flagship column of the F1 series featuring a 300 mm IsoFlare and a 75 mm titanium tweeter, with a sensitivity of 96 dB and response down to 24 Hz: the pinnacle of contemporary engineering from Fyne Audio.
FS8 Stand
The dedicated FS8 stand from Fyne Audio for their standmount monitors: rigid steel platform, mass-loaded aluminium central column with cable management, and aluminium plinth with adjustable spikes. Suitable for the F700 and F701 (as well as the F1-8 and F1-5).
Awards and Press
Press material provided by Fyne Audio · no aggregate rating or commercial score.
Official sources consulted
Data verified with official Fyne Audio documentation. Reviewed: 2026-06-11.