FA302iC
The largest model in the FA300iC installation series: a 200mm 2-way coaxial loudspeaker with a pivoting tweeter, derived from the F300 series, suitable for ceiling or wall mounting with bass extending below 40 Hz.
FA301iC
The compact model from the FA300iC installation series: a 150 mm 2-way coaxial loudspeaker with a pivoting tweeter, derived from the F300 series, designed for ceiling or wall mounting with a depth of just 92 mm.
Official finishes Paintable round grille
Availability, lead time and price: confirmed in your quotation.
Description
The FA301iC is the compact model in the FA300iC installation series, a full-range loudspeaker designed for discreet home installation. Based on the award-winning F300 series loudspeakers, this ceiling or wall model employs the same 150 mm multi-fibre bass/midrange cone with FyneFlute surround and a 25 mm polyester dome tweeter mounted coaxially in a pivoting pod, allowing the sound to be directed towards the listening area. With an installation-tuned crossover, easy-mount fixings, a reduced depth of 92 mm, and low-profile paintable round grilles (optional square grille), it delivers quality sound to any room with minimal visual impact. Suitable for anything from ambient music in the kitchen to being part of a complete surround sound system.
- 150 mm 2-way coaxial loudspeaker with FyneFlute surround and 25 mm polyester dome coaxial tweeter
- For ceiling or wall installation, with a tweeter adjustable towards the listening position.
- Derived from the award-winning F300 series; reduced depth of 92 mm
- Easy-to-mount fixings and a low-profile, paintable round grille (optional square).
- Ø 208 mm cut-out; minimum suggested volume of 10 L
Application
Suitable for multi-zone ambient music and home cinema surround sound systems, featuring a pivoting tweeter to direct high frequencies towards the listening position.
Installation Guide
Flush mounting on ceiling or wall using easy-to-install fixings (range of 5 to 50 mm). Requires a cut-out of 208 mm in diameter and 92 mm depth behind the mounting surface. Supplied with a low-profile, paintable round grille (optional square grille of 233 × 233 mm available as an accessory); minimum suggested volume of 10 L.
Official Finishes
- Paintable round grille
Before choosing this model
The FA301iC is a two-way installation coaxial with a 150 mm cone and a steerable 25 mm polyester tweeter. It requires a 208 mm circular cut-out and 92 mm behind the mounting surface; its clamps accommodate material 5–50 mm thick. Before cutting, have the installer check the available cavity, obstructions and the suggested minimum volume of 10 L.
Tell us the number of speakers, intended amplifier and channel layout. Electrical loading and wiring need to be checked for the installation as a whole.
Price, selected version, availability and estimated lead time are confirmed individually before any order.
Purchasing, listening and delivery
Ordering and system matching
Ask about the selected version and matching with your amplifier, sources and room. Supply arrangements will be confirmed in the quotation. An enquiry does not confirm a sale.
Listening sessions and demonstrations
You can request a listening session by appointment at our Barcelona office (Carrer de Modolell, 57). When we arrange the appointment we confirm which equipment is available to hear, along with the date and time.
Home demonstrations are not offered for this product.
Delivery and setup
Delivery, its cost and the estimated timing are confirmed in writing in your quotation, for your delivery address and before you accept it.
Installation and setup can be requested as an additional service. We assess feasibility and quote it separately.
Technologies
Three Fyne Audio solutions work together to focus the image, control the bass, and reduce resonances.
- FyneFlute
FyneFlute is Fyne Audio's cone suspension/termination technology. It addresses the behaviour of the cone edge to manage unwanted resonances within the speaker's operating range.
Specifications
Acoustics
- System type
- 2-way coaxial speaker for ceiling or wall installation, with adjustable tweeter
- Sensitivity (2.83 V @ 1 m)
- 89 dB
- Nominal Impedance
- 8 Ω
- Frequency response (−6 dB typical in room)
- 44 Hz – 28 kHz
Amplification
- Recommended amplifier power
- 25 – 100 W RMS
- Maximum Power
- 200 W
- Continuous Power Handling
- 50 W RMS
Transducers
- Driver configuration
- 1 × 150 mm multifibre bass/midrange cone with FyneFlute surround and 25 mm polyester dome coaxial tweeter
Frequencies and filters
- Crossover frequency
- 3.2 kHz
- Filter type
- Passive, 2nd order low-pass, 1st order high-pass
Construction
- Suggested minimum volume
- 10 L
Dimensions and Weight
- Dimensions
- Ø 224 × 95 mm
- Net weight
- 2.0 kg
Installation
- Cutout Dimensions
- Ø 208 mm
- Mounting Depth
- 92 mm
- Fixing centres
- 5 – 50 mm
- Round grille (diameter)
- Ø 232 mm
- Square grille
- 233 × 233 mm (optional)
Compatibility
- Included Accessories
- Easy-mount fixings and low-profile round paintable grille (square grille available as an optional accessory)
Fyne Audio distribution by LineaSonora
Request a listening session for the FA301iC
Ask about amplifier matching, placement and the feasibility of a listening session by appointment. The demonstration model, venue and date must be confirmed.
Official sources consulted
Data verified with official Fyne Audio documentation. Reviewed: 2026-06-12.